Global Wings

mechanical keyboard

Find How to Clean the Mechanical Keyboard Effectively

Do you want to find how to clean the mechanical keyboard effectively? If yes, then go through this article and know everything clearly. Here you can find all the effective and safe ways to cleanmechanical keyboard that have become wet, dirty or sticky due to the accident or daily use.

Best ways to clean the mechanical keyboard:

Have a look at below to clean the mechanical keyboard in the wide range of situations ranging from dirt & dust build up to drink spillage. 

  • At first, you need to carefully disconnect the keyboard from the computer.
  • Then to remove dust or crumbs from keyboard, you must turn it upside down. Hold it with one hand firmly while tapping it with other.
  • You can use the compressed air device or air gun to blast the dirt and dust out from under the keys of mechanical keyboard.
  • A mini vacuum cleaner is also the effective way to remove dirt from the keyboard. The special keyboard vacuums are readily available from the electronic store chains.
  • If coffee, water or some other liquid spilled on the keyboard, then use the cloth to absorb as much as possible. Wipe slowly and then leave for few seconds to completely absorb the moisture.
  • After absorbing the enough amount of liquid, you can, and then you must have to place your keyboard upside down over the sink or buck for around 2 days to dry out the moisture. Immediately, you have to remove the keys from keyboard to make sure nothing sticky dries in it. 
  • Now you have to wet the clean cloth and then wipe the keyboard gently.
  • When the keyboard is sticky, then you may need to spray the small amount of house cleaner on the cloth to neutralize what are all stuck on the keys.
  • You need to use the keyboard cleaning gel. The cleaning gel is very much effective to clean the mechanical keyboard since it conforms to the keyboard shape to reach areas that are not reachable by the cloth.
  • You have to individually clean the keycaps. If your mechanical keyboard is sticky or dirty incredibly, then you have to use the keycap puller tool for removing each keycap individually for cleaning. You also need to clean the keyboard base some more with the cloth or pipe cleaner when the keycaps are off. 

Can I use water to clean mechanical keyboard?

Using the damp cloth for cleaning the exterior of the mechanical keyboard base and cleaning the keycaps can be best in removing grime and sticky residue. But it is not highly recommended to clean any of the exposed electrical parts and other interior parts. 

Even if the keyboards are promoted as the water proof or water resistant, it is best to stay away from water. Instead you can use some dry methods like vacuum cleaner, air gun, cloth, cleaning gel or pipe cleaner. Finally, the end result will be great and you can use it effectively.

Mechanical keyboards are a popular choice for their durability and tactile feel, but they require regular cleaning to maintain their performance and appearance. Over time, dust, dirt, and debris can accumulate between the keys, affecting the keyboard’s responsiveness and hygiene. Here are some tips on how to clean a mechanical keyboard effectively:

  1. Turn off the Keyboard: Before cleaning your mechanical keyboard, make sure it is turned off or unplugged to avoid any electrical damage.
  2. Remove the Keycaps: To clean the keyboard thoroughly, you should remove the keycaps. Keycaps can be removed using a keycap puller or a small tool such as a flathead screwdriver. Be careful not to pull the keycaps too hard, as this can damage the switch underneath.
  3. Clean the Keycaps: Once the keycaps are removed, you can clean them with a soft cloth or a small brush. You can also use a mild soap solution or keyboard cleaning solution to remove any stains or grime. Avoid using harsh chemicals that can damage the keycaps’ material or the keyboard’s switch.
  4. Clean the Keyboard Surface: Use a can of compressed air to blow away any dust or debris between the switches. You can also use a soft brush to sweep away any dirt or debris. To remove any stubborn stains or marks, you can use a cotton swab dipped in isopropyl alcohol. Be careful not to use too much liquid, as this can damage the switches.
  5. Clean the Switches: Use a small brush or cotton swab to clean the switches. Be gentle to avoid damaging the switches, and avoid using too much pressure or liquid. You can also use a specialized cleaning solution for switches, such as DeoxIT, to clean and lubricate the switches.
  6. Reassemble the Keyboard: Once everything is clean and dry, you can reassemble the keyboard. Place the keycaps back on the switches, making sure they are aligned properly. Test each key to make sure it is working correctly.
  7. Regular Maintenance: To keep your mechanical keyboard clean and in good condition, it’s important to perform regular maintenance. You can use a can of compressed air to blow away any dust or debris, and clean the keyboard surface and keycaps with a soft cloth or brush. It’s also important to avoid eating or drinking near the keyboard to prevent spills and stains.

By following these tips, you can effectively clean your mechanical keyboard and maintain its performance and appearance. Regular maintenance can help prolong the life of your keyboard and provide a comfortable and efficient typing experience.


Your email address will not be published. Required fields are marked *